Filter
Top Products
Installation
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 15
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the Vision 10/12 installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom video installation
specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, refer to
page...
1
Choose a location for the projector 16
2
Connect signal sources to the projector 22
3
Connect external controller to RS-232 port (optional) 27
4
Apply power to the projector 29
5
For rear-screen and/or ceiling-mount installations, select the
proper picture orientation
30
6
Lens adjustments: projected image size (zoom), position
(shift) and focus
18, 31
7
Projector calibration: adjust the following for each input,
starting with Component SD; save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position
34 through 43
Note