Filter
Top Products
Operation
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 33
PRE
L
IMINAR
Y
Figure 4-4. Vision 10/12 OSD Menu Structure
ISF Setting
Brightness
Contrast
Color
(not available on DVI or RGB-HD
inputs)
Tint
Sharpness 1, 2, 3, 4, 5
Gamma 1.0, 1.5, 1.8, 2.0, 2.2, 2.35, 2.5, 2.8
Color Temp Native, 5,000K, 5,500K, ... 10,000K
Picture Setting Custom 1, ISF Day, ISF Night
White Balance
R/G/B Gain
R/G/B Offset
Save Settings
Lamp Timer Reset
ICC Adjust
Standard, NTSC, HDTV, PAL
Intensity, Saturation, Hue
ISF Enable (on/off)
Blue Enable (on/off)
Splash Screen Timer 15, 20, 25, 30, ... 60 secs.
Noise Reduction 0, 1, 2, ... 8
Picture Adjust
Brightness
Contrast
Color
(not available on DVI or RGB-HD
inputs)
Tint
Sharpness 1, 2, 3, 4, 5
Gamma 1.0, 1.5, 1.8, 2.0, 2.2, 2.35, 2.5, 2.8
Color Temp Native, 5,000K, 5,500K, ... 10,000K
ICC Select Standard, NTSC, HDTV, PAL
White Balance
R/G/B Gain
R/G/B Offset
Save Settings
Load Saved Settings Custom 1, ISF Day, ISF Night
Source Select
Video
S-Video
Component 1
Component 2
RGB-HD
DVI
Aspect Ratio
Anamorphic (16/9)
Standard (4/3) (not
available with HD signals)
LetterBox
IntelliWide
Cinema
Cinema Fill
Image Option
HD/RGB Adjust
(available only when
RGB-HD input is selected)
Clock
Phase
Reset
Execute Auto Tune
Auto Tune
Image Position
(not available on DVI input)
H Position
V Position
Reset
Over Scan Adjust 0% to 10%
SDTV Adjust
(not available on DVI or
RGB-HD inputs)
Chroma Enhance
Video On Film (on/off)
Film Mode
Brightness Enhance (on/off)
Lamp Power 200W or 250W
Information (read-only)
Source, Resolution, V Frequency,
H Frequency, Lamp Timer, firmware
version
Restore Factory Settings
Installation
Language
English, French, Italian, German or
Spanish
Picture Configuration
Floor Front, Ceiling Rear, Floor Rear
or Ceiling Front
OSD Timeout 5 secs., 15 secs. or 60 secs.
OSD Transparent (on/off)
Source Detect Auto or Manual
Auto Power Off (on/off)
Blue Enable (on/off)
OSD Position
Top Left, Bottom Left, Top Right or
Bottom Right
Keystone
V Keystone
H Keystone
Reset
Fan High Speed Mode (on/off)