Filter
Top Products
English
Additional Information
45
No picture
This unit is not correctly connected to the input
source device.
Check the connection.
The input signal has not been correctly selected. Select the correct input signal with the input keys: Video,
S-Video, Component, Component HD, RGB HD and
DVI-I on the remote control.
POWER LED or LAMP LED blinking. Please contact your Vidikron dealer for assistance.
Image is unstable
The connection cables are not connected to this
unit.
Correctly connect the cables to the appropriate terminals.
Picture is blurred
The projection lens is not correctly focused. Adjust the focus of projection lens with the focus ring.
This unit and the screen are not aligned
squarely.
Adjust the projection angle and direction, and the height
of this unit.
Remote control does
not work correctly
The batteries are exhausted. Replace both batteries with new ones.
LAMP LED blinks in
red
The front lamp cover is not correctly attached. Correctly attach the front lamp cover.
The cooling fan does not work properly. Please contact your Vidikron dealer for assistance.
The temperature inside this unit is extremely
high.
Check that the ventilation holes are not blocked.
POWER LED blinks in
orange and green
sequentially
The lamp has exceeded its estimated life. Replace the lamp with a new one.
The lamp has burned out. Replace the lamp with a new one.