Filter
Top Products
Installation
Vidikron Vision Model 15 Installation/Operation Manual 13
3.2
Quick Setup
Table 3-1 gives a quick overview of the Vision 15 installation process. The sections following
this one provide detailed instructions.
Installation should be performed by a qualified custom video installation
specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, Refer to
page...
1
Choose a location for the projector 14
2
If installing a Vision 15ET/CineWide: Install CineWide lens
base plate (optional)
20
3
Mount the projector 22
4
Connect signal sources to the Vision 15 23
5
Connect external controller to RS-232 port (optional) 28
6
Connect 12-volt trigger output to retractable screen or other,
12-volt trigger-activated equipment (optional)
29
7
Apply power to the projector 29
8
Change the OSD Language (optional) 30
9
For rear-screen and/or ceiling-mount installations, select the
proper picture orientation
30
10
Primary lens adjustments: projected image size (zoom),
position (shift) and focus
17, 31
11
Install CineWide anamorphic lens (optional) 33
12
CineWide lens adjustments: position, pitch (angle), geometry
and focus
33
13
Projector calibration: adjust the following for each input;
save settings when finished:
Aspect ratio
Brightness
Contrast
Color level
Tint
Input position
42 through 47
Note