Filter
Top Products
Operation
Vidikron Vision Model 15 Installation/Operation Manual 45
InstallationTo access the Installation adjustments, press MENU, then press the or button to
highlight Installation and press ENTER. The Installation sub-menu appears. Press EXIT to
return to the previous menu or press MENU to close all menus.
Language: Select Language from the Installation menu and press ENTER. Then, use the or
button to select from the available languages: English, French, Spanish, German and
Italian.
Orientation: Select Orientation from the Installation menu and press ENTER. Then, use the
or button to change the orientation of the projected image. The Vision 15 can be
installed on a ceiling or in a rear-screen configuration with one or more mirrors. There are
four settings: Floor Front, Ceiling Front, Floor Rear and Ceiling Rear.
Keystone: Projector placement and other factors can cause geometric distortion in the
projected image. To correct this, select
Keystone from the Installation menu. This sub-menu
provides the following options:
• V. Keystone/H. Keystone: To correct distortion resulting from the angle of projection,
select
V. Keystone or H. Keystone from the Keystone menu and use the or button to
make the image rectangular. See Figure 4-6.
Installation
Language
Orientation
Keystone
Overscan
YUV/RGB Adjust
OSD Timeout
Vertical Correction
When you change a setting in the Installation menu, the change takes effect
immediately; you do not need to press ENTER afterwards. (Press EXIT to
return to the previous menu or MENU to exit.)
Note
V. Keystone 0
H. Keystone 0
Vidikron recommends that the keystone feature not be used unless
absolutely necessary, as it may cause artifacts in the image.
1. The Vision 15 keystone correction can compensate for up to
approximately 15 degrees of screen and/or projector tilt.
2. Straight lines or the edges of images may appear jagged while adjusting
the image.
Tip
Note