Filter
Top Products
4
ViewSonic PJ860
Getting Started
E
N
G
L
I
S
H
1 Remove the compartment cover by
sliding it in the direction of the arrow
shown below.
2 Insert the batteries (Alkaline type)
with the polarities (+,-) facing the
direction shown below.
3 Replace the compartment cover.
Congratulations on purchasing a ViewSonic PJ860 Office Theater
TM
LCD projector!
Save the original box and all packing material for future shipping needs.
Package Contents
•
ViewSonic PJ860 Office Theater
•
Remote Control Unit/Mouse & Laser Pointer
•
2 AA batteries
•
3 AC power cords (U.S., Europe, and China)
•
RGB computer video cable (15-pin mini D-sub
connector)
•
Video/Audio cable (RCA connectors)
• S-Video cable
(RCA connectors)
•
Audio (stereo) mini-DIN cable
Getting Started
1 Connect signal input cables
With both the PJ860 and the
computer powered OFF, connect
the appropriate video and audio
cables to the computer, VCR, or
other input sources.
Macintosh users:
Connect the
supplied Macintosh adapter to the
video cable, then to the PJ860.
2 Connect power cord
Connect the power cord to a
properly grounded AC outlet, then
to the PJ860.
3 Power-ON projector and all input
devices (computer, VCR, etc.)
• Power-ON the PJ860 projector.
• Power-ON all input devices.
Installation
To be best prepared for any future
customer service needs:
•
Write the serial number (see the
bottom of the projector) in
"For your
Records"
on page 1 of this guide.
•
Register the warranty of your projector
on the Internet at:
http://www.viewsonic.com
*IMPORTANT: The supplied INF file assures compatibility with Windows
operating systems, and the ICM file (Image Color Matching) ensures
accurate on-screen.3 A. Whcreusratiares cugistasite thignerisf yce,ure