Filter
Top Products
PJL7211ViewSonic
9
VIDEO OUT
RGB OUT
COMPONENT VIDEO OUT
Y CB/PB CR/PR
Setting up
Connecting your devices
Be sure to read the manuals for devices before connecting them to the projector.
Make sure that all the devices are suitable to be connected with this product, and
prepare the cables required to connect. Please refer to the following illustrations to
connect them. To input component video signal to the projector, an RCA to D-sub
cable or adapter is required. For more information, please see the description of
the COMPUTER IN item of the INPUT menu.
VCR/DVD player
PC
►
Do not disassemble or modify the projector and accessories.
►Be careful not to damage the cables, and do not use damaged cables.
WARNING
►Turn off all devices and unplug their power cords prior
to connecting them to projector. Connecting a live device to the projector
may generate extremely loud noises or other abnormalities that may
result in malfunction or damage to the device and the projector.
►Use appropriate accessory or designated cables. Ask your dealer about
non-accessory cables which may be required a specic length or a ferrite
core by the regulations. For cables with a core only at one end, connect
the end with the core to the projector.
►
Make sure that devices are connected to the correct ports. An incorrect
connection may result in malfunction or damage to the device and the projector.
NOTICE
►Use the cables with straight plugs, not L-shaped ones, as the
input ports of the projector are recessed.
CAUTION