Filter
Top Products
PJL7211ViewSonic 41
Item Description
MY BUTTON
This item is to assign one of the following functions to the MY
BUTTON 1/2 on the remote control.
(1) Use the ▲/▼ buttons on the MY BUTTON menu to select a
MY BUTTON - (1/2) and press the ► button to display the MY
BUTTON setup dialog.
(2) Then using the ▲/▼/◄/► buttons sets one of the following
functions to the chosen button. Press the ENTER or INPUT
button to save the setting.
• COMPUTER IN: Sets port to COMPUTER IN.
• VIDEO: Sets port to the VIDEO.
• INFORMATION: Displays the INPUT_INFORMATION or the
SYSTEM_INFORMATION or nothing.
• MY MEMORY: Loads one of adjustment data stored.
When more than one data are saved, the adjustment
changes every time the MY BUTTON is pressed.
When no data is saved in memory, the
dialog “No saved data” appears.
When the current adjustment is not
saved to memory, the dialog as shown in
the right appears.
If you want to keep the current adjustment, please press
the ► button to exit. Otherwise loading a data will overwrite the
current adjusted condition.
• PICTURE MODE: Changes the PICTURE MODE.
• FILTER RESET: Displays the lter time reset conrmation
dialogue.
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item appear or disappear.
MY SOURCE
U
sing ▲/▼ buttons selects the picture input port to be selected with
pressing the MY SOURCE/DOC.CAMERA button on the remote
control.
Select the picture input that is connected with a document camera.
COMPUTER IN
ó
VIDEO
(continued on next page)