ViewSonic Projector PJ250 Projector User Manual


 
7 ViewSonic PJ250
Operating the Projector
1
Set up the screen and the projector
See the affixed "Projection Distance Table" for the desired distance between the screen and the
projector.
2
Connect the personal computer or video equipment to the projector.
3
Connect the AC IN connector of the projector and the power outlet using the supplied power
cable.
The POWER indicator will light amber, the cooling fan will rotate at low speed, and the unit will
enter the standby mode.
4
Switch the projector power on.
Main unit operation: Press and hold the POWER button for several seconds.
Remote control operation: Press the POWER ON button.
The POWER indicator changes to a flashing green and lights steadily after about 60 seconds. The
projection screen brightens after about 40 seconds.
The projector is now capable of regular projection.
5
Switch the power of the connected equipment on.
6
Select the input
Main unit operation: Press the SOURCE button.
Remote control operation: Press the desired button from among the input selection buttons.
To wall outlet
Firmly plug in all the way
Flashes green
(Approximately
60 seconds)
Lit green
Power is on