Filter
Top Products
12 ViewSonic NMP-530
E
N
G
L
I
S
H
MANAGEMENT
STARTUP URLS/NETWORK CONFIGURATION
The Network Configuration screen allows you to select the video that appears on-screen when you
boot up the NMP-530. To go to the Network Configuration screen after logging into the NMP-530,
under Management click Startup. The Startup URLs screen and the Network Configuration
screen appears as shown below. Failover Video and Failover Browser - the URL entered on these
fields will be enabled if the main Video and Browser Startup URL's failed to play.
1 To play a particular video at startup, in the Video field, enter a valid HTML page. Here are
some examples:
• http://<ip-address->/<mpeg-1/2-file-located on WEB Server>
• udp://<ip-multicast-address>/port
• rtp://<multicast-address>/port
• iptv://<ip-multicast-address>/videoport/audioport
• playlist=http://<ip-address>/<playlist-file-located-on-WEB-server>
2. In the Browser field, enter a startup web screen (for example, http://www.viewsonic.com). Note:
The MAC address is a read-only field that displays the built-in MAC address of the unit.
Continued . . .
Displays the IP address
Displays the Video source
Displays the Browser