Filter
Top Products
ViewSonic NMP-530 17
E
N
G
L
I
S
H
FTP SERVER
Uploading content to local storage using FTP:
1. To enable FTP Server under Management click System Services. The System Services
Configuration screen appears as shown on the next page. In the FTP Server field, select
YES > click Apply. To save your settings on the NMP-530, under Administration click Save
Configuration > Reboot.
2. The FTP server user name and password default Username and Password is admin/
admin. For security reasons, it is recommended that the default be changed. To change the
FTP server user name and password, click FTP Server under Management. The screen
shown below appears. Enter a new user name and password > click Apply. To save your
settings on the NMP-530, under Administration click Save Configuration > Save >
Reboot.
3. Using an FTP Client software (i.e. Cute FTP, etc.), use the IP Address of the NMP-530 as the
FTP Server address and enter the username and password set in Management/FTP Server
(default: admin/admin).
4. Open the folder hd1 and start uploading content to the local storage. Both videos and web
pages can be downloaded onto the storage.