Filter
Top Products
ViewSonic NMP-530 13
E
N
G
L
I
S
H
3. In the DHCP field of the Network Configuration screen, tap the down arrow for the pull-
down menu and select Enabled to dynamically get network parameters. Make sure there are
values in the IP address, Mask, Gateway, and DNS fields although DHCP assigns values to
these fields automatically. If you select Disabled, type valid network parameters in these
fields.
4. If any changes were made to this screen, do the following:
• To enable the changes, click Apply
• To save the changes, under Administration click Save Configuration > click Save.
BROWSER CONFIGURATION
The Browser Configuration screen allows you to make specific screen settings for a specific
URL that you chose. under Management click Browser. The screen shown below appears.
Note: 1 millisecond = 1/1000th second.
1. In the Macromedia Flash Transparency Source field, select one of the options from the
pull-down menu.
2. In the Screen rotation angle (clockwise) field, select one from the pull-down menu for the
angle of rotation of the HTML content displayed on-screen. This feature is useful when the
NMP-530 is installed vertically.
Continued . . .