Filter
Top Products
ViewSonic PJ452
32
INPUT menu
With the INPUT menu, items shown in the table below can
be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
Item Description
COLOR
SPACE
Using the buttons ▲/▼ switches the mode for color space.
AUTO RGB SMPTE240 REC709 REC601
════=══=══=══=══=══=══=════
• This item can be chosen only at a RGB signal or a component
video signal.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. In
such a case, it might be good to select the SMPTE240 or the
REC709.
VIDEO
FORMAT
Using the buttons ▲/▼ switches the mode for video format.
AUTO NTSC PAL SECAM
N-PAL M-PAL NTSC4.43
• This item performs only at a video signal from the VIDEO
port or the S-VIDEO port. For a component video signal, the
signal type is identified automatically, independently of this
function.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well at some signals. If the
picture becomes unstable (ex. an irregular picture, a color lack),
please select the mode depending on the input signal.