ViewSonic PJ452 Projector User Manual


 
ViewSonic PJ452
52
Warranty and after-service
If a problem occurs with the equipment, first refer to the “Troubleshooting” (46)
and run through the suggested checks. If this does not resolve the problem, please
contact your dealer or the service company. They will tell you what warranty
condition is applied.
Specifications
NOTE
This specifications are subject to change without notice.
Item Specification
Product name Liquid crystal projector
Panel size 1.5 cm (0.6 type)
Drive system TFT active matrix
Liquid
Crystal
panel
Pixels 786,432 pixels (1,024 horizontal x 768 vertical)
Lens F=1.77 f=20.7 mm
Lamp 165W UHB
Power Supply AC100-120V/2.7A, AC220-240V/1.5A
Power Consumption 240W
Temperature range 5 ~ 35°C (Operating)
Size
285 (W) x 73 (H) x 202 (D) mm
(Not including protruding parts)
Please refer to the following figure.
Weight (mass) 2.25 kg
Ports
RGB input
RGB........ D-sub 15pin mini x1
Communication port:
CONTROL .....D-sub 9pin x1
Video input
VIDEO.........................RCA x1
S-VIDEO ................ S-video x1
Audio input
AUDIO ......Stereo mini x1
Lamp RLC-004
Optional
parts
Air filter and
others
Please consult your dealer or ViewSonic for part information.