Filter
Top Products
ViewSonic Wireless Router 30
For Windows 2000 and XP:
1 Click the Start button and select Run.
2 Type cmd in the field provided, and press the OK key.
3 At the command prompt, run ipconfig /all, and look at your
wireless router’s physical address.
4 Write down your wireless router’s MAC address.
To clone your network wireless router’s MAC address onto the
wireless router and avoid calling your ISP to change the registered
MAC address, follow these instructions.
1 Select Enable.
2 Enter your wireless router's MAC address in the MAC
Address field.
3 Click the Apply button.
To disable MAC address cloning, keep the default setting,
Disable.
Remote Management: This feature allows you to manage your
wireless router from a remote location.
Internet. To disable this feature, keep the default setting, Disable.
To enable this feature, select Enable, and use the specified port
(default is 8080) on your PC to remotely manage the wireless
router. Also, change the wireless router’s default password to one