Filter
Top Products
ViewSonic Wireless Router 31
of your own, if you haven’t already. A unique password increases
security.
To remotely manage the wireless router, enter http://
xxx.xxx.xxx.xxx:8080 (the x’s represent the wireless router’s Internet
IP address, and 8080 represents the specified port) in your web
browser’s address field. You will be asked for the wireless router’s
password. After successfully entering the password, you will be able
to access the wireless router’s web-based utility.
IMPORTANT: If the Remote Management feature is
enabled, anyone who knows the wireless router’s
Internet IP address and password will be able to alter
the wireless router’s settings.
MTU: MTU is the Maximum Transmission Unit. It specifies the largest
packet size permitted for Internet transmission. Keep the default
setting, Auto, to have the wireless router select the best MTU for your
Internet connection, To specify a MTU size, select Manual, and enter
the value desired (default is 1400). You should leave this value in the
1200 to 1500 range.
Traffic Log: The wireless router can keep logs of all incoming or
outgoing traffic for your Internet connection. This feature is disabled
by default. To keep activity logs, select Enable.
To keep a permanent record of activity logs as a file on your PC’s hard
drive, Log viewer software must be used. In the Send Log to field,
enter the fixed IP address of the PC running the Log viewer software.
The wireless router will send updated logs to that PC.