Filter
Top Products
Multifunctional settings
OPTION menu
Item Description
AUTO SEARCH
Using the buttons ▲/▼ turns on/off the automatic signal search
function.
TURN ON
TURN OFF
When the TURN ON is selected, detecting no signal automatically
cycles through input ports in order of following. Then when an input
is found, the projector will stop searching and display the image.
RGB1
RGB2
S-VIDEO
VIDEO
AUTO OFF
Using the buttons ▲/▼ adjusts the time to count down to automati-
cally turn the projector off.
Long (max. 99 minutes)
Short (min. 0 minute = DISABLE)
AUTO OFF
ENABL
E
10
AUTO OFF
DISABLE
0
When the time is set to 0, the projector is not turned off automati-
cally.
When the time is set to 1 to 99, and when the passed time with a
no-signal or an unsuitable signal reaches at the set time, the projec
-
tor lamp will go off and the power indicator begins blinking. Please
refer to the section “Turning off the power”
.
With the OPTION menu, items shown in the table below can
be performed.
Choose an item using the cursor buttons ▲/▼ on the pro-
jector or remote control, and press the cursor button ► on
the projector or remote control, or the ENTER button on the
remote control to progress, except for the items LAMP TIME
and FILTER TIME. Then perform it referring to the following
table.
MENU
[
RGB1
]
:SELECT
AUTO SEARCH
AUT
O OFF
LAMP TIME
FILTER TIME
SERVICE
TURN OFF
0
0
0
PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
U
39ViewSonic PJ452