Filter
Top Products
19
Timing of replacing the lamp
When the lamp’s total working time accumulates to over 2000 hours, the On-Screen Display (OSD) will deliver a
message recommending that you replace the lamp. Please contact a service center to replace the lamp as soon as
possible
The following lamp warning displays will remind you to change the lamp.
Status Message
The lamp has been in operation for 2000 hours. Install a new lamp
for optimal performance. You may continue to operate the
projector.
Replacing the lamp
Type number : RLC-052
To reduce the risk of injuries to fingers and damage to internal components, use caution when removing lamp glass that has
shattered into sharp pieces. Before replacing the lamp, clean the lamp compartment and dispose of cleaning materials. Be
careful of sharp edges in the lamp compartment. Wash hands after lamp replacement.
Only ViewSonic certified lamps are tested with this projector. Use of other lamps may cause electrical shock and fire.
Turn the power off and disconnect the projector from the wall socket before replace the lamp. Follow with below
instruction..
Contact your dealer for details.
Resetting the lamp timer
1. Press MENU to open the On-Screen Display (OSD) menu
2. Go to the Advance menu and press Enter.
3. Press
to select Lamp Reset and press Enter.
PJD2121ViewSonic