Filter
Top Products
CONFIGURING THE ONETOUCH BUTTONS 31
■ Straighten Image—Select this option to let the scanner automatically
determine if a page is skewed, then straighten its image. The input tray
paper guides should be flush to the edges of the paper to prevent paper
feeding in at too great of an angle.
■ Invert Image—Only available for Black&White scanning, this option
reverses the black and whites of an image.
■ Duplex—Scan both sides of the page. If this option is not selected, the
scanner will scan the face-down side of the page only.
■ Skip Blank Originals—Skips pages that are completely blank. This
option is only available for Duplex scanning.
■ Color Filter—Color filter is the ability of your scanner to automatically
remove a color from a scanned item. Color filter applies to
Black&White or GrayScale Mode.
Note: The Simplex and Duplex buttons on the scanner take precedence
over the OneTouch settings. In other words, if the LED number on the
scanner is configured to scan as Duplex, but you press the Simplex
button, the scanner scans in Simplex, and vice versa.
Original Image. Inverted Image.
The original with a red
watermark over black text.
The scanned item with the
red filtered out.