Filter
Top Products
Programmable Station Numbering
This function allows the system to have "Programmable
station numbers", other than the "Hardwired station
numbers" by programming.
The unprogrammed stations (unit station numbers) are
used as original hardwired station numbers.
1. Numbering schedules can be changed easily by pro-
gramming in stead of rewiring.
2. Numbering schedule (such as 200's (20's), 300's (30's),
900's (90's)) is available for convenient office differen-
tiation. (architectual numbering).
3. Normally, station numbers which are included in a
station paging zone must be sequential, but programm-
able station numbers can be randomly included in a
station paging zone.
4. This function is programmed at station No. 200. Please
see Installation Instructions for EXES-5000 CPU-55.
5. People operating the intercom stations need not be
aware of the Hardwired station numbers. However, care
must be taken when programming using station No. 200
in the exchange, as hardwired station numbers must be
used for that purpose.
< Example >
Hardwired
station number
2 0 1
202
203
204
205
Programmable
station number
2 0 1
202
3 0 1
302
Department 1
Department 2
Hardwired
station number
201
202
203
Programmable
station number
201
231
2 4 1
Station
paging zone
202
Hardwired
station number
Programmable
station number
200
2 0 1
203
203
2 0 1
326
327
Hardwired
station number
Programmable
station number
3-digit dialing
No.200~32 7
No.200~99 9
2-digit dialing
No.20~9 9
No.20~9 9
— 24 —