Filter
Top Products
TL-WR641G 108M Wireless Router User Guide
- 4 -
¾ WAN:
This WAN port is where you will connect the cable/DSL Modem, or
Ethernet
¾ Reset button:
There are two ways to reset the router's factory defaults:
1) Use the Factory Defaults function on System Tools -> Factory Defaults page in the
router's Web-based Utility.
2) Use the Factory Default Reset button: First, turn off the router's power. Second, press
and hold the default reset button then turn on the router's power, until the SYS LED
lights up (about 3 seconds). Last, release the reset button and wait for the router to
reboot.
)
Note:
Ensure the ro
uter is powered on before it restarts completely.
¾ Wireless antenna
Figure 1-2