Filter
Top Products
TL-WR641G 108M Wireless Router User Guide
- 53 -
port. The default is disabled. If enabled, the ping packet from the Internet cannot access
the router.
¾ Forbid Ping Packet from LAN Port - Enable or Disable forbidding Ping Packet to access
the router from the LAN port. The default value is disabled. If enabled, the ping packet
from the LAN port cannot access the router. (Defends against some viruses)
Click the Save button to save the settings.
Click the Blocked DoS Host Table button to display the DoS host table by blocking. The page
will appear that shown in Figure 4-48:
Figure 4-48
This page shows Host IP Address and Host MAC Address for each host blocked by the
router.
¾ Host IP Address- The IP address that blocked by DoS are displayed here.
¾ Host MAC Address - The MAC address that blocked by DoS are displayed here.
To update this page and to show the current blocked host, click on the Refresh button.
Click the Clear All button to clear all displayed entries. After the table is empty the blocked host
will regain the capability to access Internet.
Click the Return button to return to the Advanced Security page
4.9 IP & MAC Binding Setting
Figure 4-49
There are two submenus under the IP &MAC Binding menu (shown in Figure 4-49): Binding
Setting and ARP List. Click any of them, and you will be able to scan or configure the
corresponding function. The detailed explanations for each submenu are provided below.
4.9.1 Binding Setting
This page displays the IP & MAC Binding Setting table; you can operate it in accord with your
desire. (shown in Figure 4-50).