VTech 2S Graphics Tablet User Manual


 
29
Cannot connect to Wi-Fi. The Wi-Fi is
disabled.
Press
to enable Wi-Fi.
The firmware of
the InnoTab
®
2S is
not up-to-date or
the tablet has not
been registered
on Learning Lodge
Navigator
®
.
Register your tablet on Learning
Lodge Navigator
®
, and make
sure the firmware is the most
up-to-date version. For the
instructions, please see the
Getting Started With Wi-Fi
section on page 8.
Wi-Fi is enabled,
but there is no Wi-Fi
network available.
There is no Wi-Fi
network in your
location or network
signal is weak.
Move to a location that has an
available Wi-Fi network.
Wi-Fi network is
available, but the
connection failed.
The selected
network is not
configured properly
or authentication is
required.
Make sure the network is
configured properly and there
is no firewall blocking Internet
access. If a password is needed,
make sure the correct password
is entered with the appropriate
uppercase/lowercase letters
indicated.
If your InnoTab
®
2S does not respond to an inserted cartridge, please
carefully try the following:
•Removeallbatteriesandunplugallwiring.
•Useacottonswabdippedinrubbingalcoholoranalcohol-basedwindow
cleaner to gently clean the contact area of the cartridge slot.
•Ifnecessary,dryallthecleancontactareaswithasoft,lint-freecloth.
•Pleasemakesurethatallpartsarecompletelydrybeforerestoringelectricity.
Static electricity may cause the InnoTab
®
2S to malfunction. In some
cases, the game play score stored in the tablet memory may be lost. In
cases where InnoTab
®
2S is malfunctioning due to static electricity, reset
the tablet by removing and reinstalling the batteries, or by unplugging and
repluggingtheACadaptor.Or,ifthestaticelectricitymalfunctionoccurred
duringthedownloadingprocess,disconnecttheUSBcable,deletethe
corrupted file, and reset the tablet as described above. Then reconnect
theUSBcableandrestartthedownloadprocess.
For more information and troubleshooting tips, visit
www.vtechkids.com/tutorials/innotab2
T
E
C
H
N
I
C
A
L
S
U
p
p
O
R
T