Filter
Top Products
Making a Component Video Connection
Connect your chosen cable from the Component Video output on the Wadia
170iTransport (connection 5 in the iTransport Outputs illustration) to the
corresponding Component Video input on your Television, A/V Receiver or
Preamp Processor.
(The Wadia 170iTransport only acts as a high-performance pass-thru for
video signals. Picture performance is limited to the quality of the material
stored on the iPod. Some video adjustments may be necessary on your
video display for maximum video performance).
Making a Power Connection
Connect the supplied Power Cord to the AC Adapter. Connect the AC Adapter
with locking connector to the Power Input on the Wadia 170iTransport
(connection 1 in the iTransport Outputs illustration). The locking connector
has a sleeve that has to be pulled back while the metal portion of the connector
is being inserted into the Wadia 170iTransport (this may require both hands).
The connector can only go in with the flat side of the connector facing up. Once
the connector is all the way in, let go of the sleeve and it will return to its original
position and lock the connector in place. Finally plug the Power Cord into the
wall to supply power to the Wadia 170iTransport.
13