Warwick X7220 Network Router User Manual


 
Address Mode Not used
TX Address Not used
RX Address Not used
Restore Defaults Set Factory Defaults.
Exit without Save Return to Modem
Advanced Menu
Return to Main Menu Display Main Menu by pressing the left Arrow Key
Enable AT Instructions Not used
TX Priority Not used
Mode of Operation Selects one of the following: Modem 1 in continuous use,
Modem 2 in continuous use
Modem 1 and Modem 2 cycling on the set Duty Cycle
Duty Cycle Selects the time in hours for each modem to be operational. (1 to 48 Hr)
Packetise Data Not used
Number of Retries Not used
Enable Remote Access Not used
Alarm code One of the following alarm codes are displayed:
No fault 00
Bit error rate high 1 11
PSU fail 1 12
RF power fail 1 14
Bit error rate high 2 21
PSU fail 2 26
RF power fail 2 24
Dual RF power fail 75
Dual PSU 73
Engage Rpt Path Not used.
Set Repeater Path Not used