Filter
Top Products
5-66
Basic Configuration
5.9.9. TACACS Parameters
To access the TACACS Configuration Menus, proceed as follows:
• Text Interface: Type /N and press [Enter] to access the Network Configuration
Menu. From the Network Configuration Menu, type 28 and press [Enter] to display
the TACACS Configuration Menu.
• Web Browser Interface: Place the cursor over the "Network Configuration" link
on the left hand side of the screen. When the fly-out menu appears, click on the
"TACACS Parameters" link to display the TACACS Configuration Menu.
The TACACS Configuration Menus offer the following options:
• Enable: Enables/disables the TACACS feature at the Network Port. (Default = Off.)
• Primary Address: Defines the IP address or domain name (up to 64 characters)
for your primary TACACS server. (Default = undefined.)
• Secondary Address: Defines the IP address or domain name (up to 64 characters)
for your secondary, fallback TACACS server (if present.) (Default = undefined.)
• Secret Word: Defines the shared TACACS Secret Word for both TACACS servers.
(Default = undefined.)
• Fallback Timer: Determines how long the MPC will continue to attempt to contact
the primary TACACS Server before falling back to the secondary TACACS Server.
(Default = 15 Seconds.)
• Fallback Local: Determines whether or not the MPC will fallback to its own
password/username directory when an authentication attempt fails. When enabled,
the MPC will first attempt to authenticate the password by checking the TACACS
Server; if this fails, the MPC will then attempt to authenticate the password by
checking its own internal username directory. (Default = Off.)
• Authentication Port: The port number for the TACACS function. (Default = 49.)