IMPORTANT PRODUCT SAFETY
INSTRUCTIONS
Read carefully and follow all warnings and instructions in this User's Manual and those
marked on the product before
you use the monitor. Failing to follow these warnings can result
in personal injury or damage to the monitor. Keep this User’s Manual in a convenient location
for future reference. Important: Save the original box and all packing material for future
shipping needs.
Proper Handling of the Monitor
Always handle the LCD monitor with care. Avoid touching the LCD screen. Skin oils are
difficult to remove.
Always position the LCD monitor on a stable and level surface. Unstable surfaces can cause
the monitor to topple and fall, resulting in possible damage or injury.
Avoid exposing the monitor to direct sunlight or high temperatures, which can damage or
shorten its useful life. Do not place it near heat sources such as radiators, heat registers, or
other appliances that generate heat. Orient the monitor away from direct sunlight to reduce
glare.
Avoid exposing the monitor to rain, water, moisture or high humidity. Do not place it near
basins or sinks where it may come in contact with water.
Never place heavy or sharp objects on the LCD monitor, video cable, or power cord.
Overloading Outlets
Do not overload electrical power sources when installing the LCD monitor. Overloading wall
outlets, circuits, or extension cords can result in overheating, fire, or electric shock. Use only
grounded or polarized outlets.
Power Cord Protection
Minimize wear on the power supply cord. The power supply cord should be routed away from
foot traffic and contact with other objects. Do not route the power cord under rugs or carpeting.
The cord should never be severely bent, pinched, or twisted. Periodically inspect the power
cord and each end of the cord for wear or damage. Unplug and replace the cord if it is
damaged.
Ventilation
Slots and openings on the cabinet are provided for ventilation purposes. To ensure reliable
operation of the product and to protect it from overheating, these openings must not be
blocked or covered. Keep the LCD monitor a minimum of four (4) inches away from any wall to
assure sufficient airflow and ventilation. Increased temperatures may cause fire or device
failure.
2