Filter
Top Products
Installation
Congratulations on your purchase of a Westinghouse 15” LCD monitor. Sleek and practical,
this lightweight and wall-mountable LCD monitor delivers a crisp and clear display optimized
for 1024 x 768 resolution.
Package Contents
• LCD Monitor (15”)
• Detachable LCD Base Stand
• Cables
o AC/DC Power Supply Adapter and Cord
o VGA (HD15) Male – Male Cable
o 3.5 mm Male – Male Stereo Audio Cable
• Literature
o User’s Manual
o Warranty Card
1. Attaching the Base Stand to the LCD Monitor
Attach the base stand to the LCD monitor stand neck. Align the holes and tabs; press in and
snap into place. To remove the base stand, press the tabs on the bottom of the stand neck
and remove the base.
2. Connect the VGA and Audio Cables
Connect a VGA cable (to the connector labeled “D-SUB”) and an audio cable (to the connector
labeled “LINE-IN”) from the back panel of the LCD monitor to your PC.
3. Connect the Power Cable
Connect the DC power adapter cord to the monitor (to the connector labeled “DC-IN”) and
then connect the female AC power cord to the adapter. Plug the AC power cord into a properly
grounded AC outlet.
4. Turn the Power On
Press the power button on the front of the LCD monitor. The LED light will turn green if a
signal input is detected or it will be orange if no input is detected.
Auto Adjust
Although a computer can detect the new monitor with the built-in VESA Plug & Play feature,
the Auto Adjust function can be used to enhance the display. To perform the Auto Adjust:
Turn on the computer and monitor. Press the “Auto” button to start Auto Adjust. The LCD
monitor will perform the Auto Adjust process automatically for 10 seconds and you will notice
the image change after it has been adjusted.
6