Filter
Top Products
– or –
®
10
BELT CLIP INSTALLATION FOR P
PA R35
T
O INSTALL:
Position the belt clip on the rear of the R-35 receiver as shown in Figure 6a. Turn the belt clip 180º left
or right as shown in Figure 6b. The belt clip is now installed and ready for use.
TO REMOVE:
Turn the belt clip 180º so the edge points toward the top of the unit as shown in figure 6b. Gently pull
the belt clip away from the unit to remove.
FI
GURE
6B
FIGURE 6A
EARPAD CLEANING FOR PP
A R35
Do not immerse the earphone in water or other cleaning agent. Foam pads may be removed and washed with
a mild laundry soap solution, rinsed thoroughly, and air dried. Y
ou may also opt to purchase new foam pads.
Call Customer Service for ordering information:
1-800-843-3544