Filter
Top Products
88 Furniture Wizard CPT-8061 Wireless Scanner Use and Installation v10
8. Run the IRLoad.exe program from your C:\FW2000\Drivers\Cipher folder on which
the serial cable is connected from the Communications cradle. Select the K8000-
nnn.shx file (where ‘nnn’ is the firmware release number) provided by CIPHER Labs.
9. After loading the Scan-IT software CD, the following communications port and baud
rate information appears in the display window on the scanner. This allows you to
verify previous input into the scanner. Click OK to continue the firmware upload
process.
Figure 86: COM Port Properties Dialog
10. During the software upload process, a Please Wait Loading message appears in the
display window on the scanner, and a progress bar appears on the connected PC.
When the process is finished, a Downloaded Completely” Do you want to
download another program? message appears in the display window on the
scanner:
Figure 87: Downloaded Completely Message