Filter
Top Products
-4-
RMT16-IR INSTALLATION
Remove battery cover from the back of the RMT16-IR remote.1.
Verify that DIP switches 1 & 2 are in the down (OFF) position.2.
Insert the battery; hold the battery so that you can see the positive 3.
side facing up. The side that is not marked must be facing down.
Test the RMT16-IR remote by pressing ONLY one button at a time. 4.
The indicator light on the remote will fl ash once each time you
press a button. WARNING: Do not press multiple buttons simulta-
neously and do NOT press buttons rapidly. These actions will cause
the remote to reset and steps 1-4 will have to be repeated.
Note: The RMT16-IR ships with two batteries. One battery is re-5.
quired for operation, the second battery is complimentary
.