In the event of IR confl icts, please do the following:
Remove the battery cover from the back of the RMT16-IR remote.1.
Locate the DIP Switches above the batteries.2.
Switch the DIP Switches on the RMT16-IR to any of the combina-3.
tions pictured below.
DIP Switches 1 and 2 in the RMT16-IR infrared remote correspond 4.
with DIP Switches 3 and 4 inside the 4X4 HDMI Matrix respectively.
Switch the DIP switches inside the 4X4 HDMI Matrix to match the
same Remote Channel as the RMT16-IR.
The 4X4 Matrix is now set to a new IR Code.5.
Resolving Infrared Code Confl icts
-7-