Filter
Top Products
104 Operating Manual for Multichannel Functionality (GPIB-M)
SCPI Command Reference
SCPI Command Summary
Table B.1IEEE 488.2 Commands
Function
SCPI Command
Description Query
Clear Status
*CLS
[:]STATus[<channel>]:CLEar
Clears the status data structures. N/A
Standard Event Status
Enable Query
*ESE?
[:]STATus[<channel>]:STANdard:ENABle
Query the Standard Event Status Enable
register settings.
N/A
Standard Event Status
Enable
*ESE
[:]STATus[<channel>]:STANdard:ENABle <ESE-word>
Set the Standard Event Status Enable
Restier bits.
N/A
Standard Event Status
Register Query
*ESR?
[:]STATus[<channel>]:STANdard[:EVENt]?
Query Standard Event Status Register. N/A
Identification Query
*IDN?
[:]SYSTem[<channel>]:IDENtify?
Query identification string. (Manufacturer’s
information.)
N/A
Individual Status Query
*IST?
Reads the current state of the IEEE 488.1
defined "ist" local message in the device
N/A
Operation Complete
Command
*OPC
Causes the device to generate the operation
complete message in the Standard Event
Status register when all pending delected
device operations have finished
N/A
Query Opertion Complete
Command
*OPC?
Place and ASCII character “1” into the
output queue when all pending operations
have been finished. See IEEE 488.2-1992
section 12.5.3.
N/A
Option Identification
Query
*OPT?
[:]SYSTem[<channel>]:OPTion?
Identify reportable device options N/A
Parallel Poll Enable
Register Query
*PRE?
Query the Parallel Poll Enable Register
setting
N/A
Parallel Poll Enable
Register Command
*PRE <status-enable>
Sets the Parallel Poll Enable Register bits.
See IEEE 488.2 section 11.6 for details.
N/A
Recall
*RCL
[:]SYSTem[<channel>]:RECall <setting_location>
Restores the settings of unit from values
stored in memory.
N/A
Reset
*RST
[:]SYSTem[<channel>]:RESet
Performs a device reset. Set the power
supply to a known state that is independent
of the use history of the device.
N/A
Save User Settings
*SAV
[:]SYSTem[<channel>]:SAVE[USER] <setting_location>
Stores the current setting of the device in
local memory. Scope is same as *RST
N/A
Save Default Settings
*SDS
[:]SYSTem[<channel>]:SAVE:DEFault <setting_location>
Save the factory default settings. N/A
Query Service Request
Enable
*SRE?
[:]STATus[<channel>]:SREQuest:ENABle?
Query the Service Request Enable Register
bits.
N/A
Service Request Enable
*SRE
[:]STATus[<channel>]:SREQuest:ENABle <status-enable>
Set the Service Request Enable Register
bits.
N/A
Read Status Byte
*STB?
[:]STATus[<channel>]:SBYTe[EVENt]?
Read the status byte and Master Summary
Status bit.
N/A