Filter
Top Products
iii
This guide for use by qualified personnel only
About This Guide
Purpose
The purpose of this Installation Guide is to provide explanations and
procedures for installing and configuring the GT Series Three Phase
Ethernet Communications Kit.
Scope
The Guide provides safety guidelines, procedures for installing the GT
Series Three Phase Ethernet Communications Kit, as well as information
about configuring the Ethernet Communications Kit protocol for proper
operation. It does not provide details about the GT Three Phase Grid Tie
Inverters. You need to consult the Operation manual and/or Installation
manual for this information.
Audience
The Guide is intended for anyone who needs to install and operate the GT
Series Three Phase Ethernet Communications Kit. Installers should be
certified technicians or electricians.
Organization
This Guide is organized into three chapters:
Chapter 1, “Introduction”, contains a description of the Ethernet
Communications Kit and lists the specifications and requirements needed
for use.
Chapter 2, “Installation”, contains procedures on how to de-energize the
Inverter, install the new Ethernet Communications Kit, and re-energize
the Inverter.
Chapter 3, “Configuration”, describes how to configure and activate the
Ethernet Communications Kit to establish communication with the
Inverter.
Ethernet.book Page iii Thursday, May 29, 2008 4:20 PM