Front Panel (AC End)
2–3
Front Panel (AC End)
Figure 2-1 Front Panel: AC End
ON
OFF
➀
➆
➆
➃
➅
➄
➁
➂
Feature Description
➀
➀➀
➀
Remote Control Jack Located on the bottom of the inverter. It
allows you to connect the remote On/Off switch.
➁
➁➁
➁
On/Off Switch
This switch turns the inverter’s control circuit on and
off. It is not a power disconnect switch. You must disconnect AC and
DC power before working on any circuits connected to the inverter.
➂
➂➂
➂
OVER LOAD
Indicator This indicator lights when the inverter shuts
down because of an AC overload or a short circuit.
➃
➃➃
➃
OVER TEMP
Indicator This indicator lights when the inverter shuts
down to protect itself from overheating. When the inverter cools, it
restarts automatically, and the indicator turns off.
➄
➄➄
➄
VOLTS
and
AMPS
Indicators These display battery voltage and
current.
• Current should be in the green area for continuous operation.
• When current is in the yellow area, the inverter will operate for
several minutes.
• When current or voltage are in the red, the inverter shuts down.
➅
➅➅
➅
AC Outlet Delivers 1000 watts of continuous AC power. This is a
Ground Fault Circuit Interrupter (GFCI) outlet.
➆
➆➆
➆
Mounting Flanges
PROWatt100.book Page 3 Friday, January 5, 2001 3:03 PM
