Filter
Top Products
3.0 OPERATION
12
©2002 Xantrex Technology Inc.
P/N 973-0022-01-01 Rev A 04/2002
LED Control Indicators
The codes indicate the status of the inverter’s LEDs. The two letter codes are
as follows:
noitaiverbbA noitinifeD
NIgnitrevnI
TLeiTeniL
1ANI1CA
2ANI2CA
KBkluB
LFtaolF
RErorrE
COtnerruCrevO
Table 3-2
LED Control Indicator Definitions
If no codes display, it is because there are no LEDs on or the adapter is not
responding.
NOTE: If an LED is flashing, it may not appear each time
you pressed “1” because it was not illuminated when the
SWCA sent the data to the computer. A flashing o LED
should be indicated by the LED two letter code being
repeated on the display.