Filter
Top Products
3.0 OPERATION
©2002 Xantrex Technology Inc.
P/N 973-0022-01-01 Rev A 04/2002
15
Accessing HELP Information from the SWCPS Program
Help is available while using the SWCPS program by pressing F10 on the
computer keyboard.
To leave the help screen, press the key to return to control panel
simulation program.
Accessing the SETUP MENU from the SWCPS Program
To access the inverter
SETUP MENU
, press ALT-F8 together. This feature is
available for inverters with Rev 4.01 and higher software versions.
To leave the
SETUP MENU
, press which returns you to the
SET INVERTER
main menu display.
Switching Between Multiple SWCA Adapters/inverters
To select another inverter, simply press the number key for the SWCA
adapter that was programmed in and written on the outside of the adapter as
previously discussed. Use numbers from 1 to 8.
Exiting the SWCPS Program
To exit the SWCPS program, press ALT-X. You can also use the ESC key to
quit as well.