Xantrex Technology SW Communications Adapter Network Card User Manual


 
©2002 Xantrex Technology Inc.
P/N 973-0022-01-01 Rev A 04/2002
1
1.0 INTRODUCTION
The Sine Wave Communications Adapter (SWCA) allows any SW series
inverter/charger to be connected to a computer serial port or directly to a modem to
be controlled and monitored over long distances.
The SWCA package includes the following items:
SWCA adapter (gray plastic housing with green LED, phone jack and a
25-pin connector)
Custom-made Serial Port Adapter (black plastic housing with phone jack and
9-pin connector)
25-foot, 4-conductor phone cable (with RJ11 jack tabs on the same side of
the cable)
3.5" floppy disk with DOS program SWCPS.EXE (simulates the inverters
control panel)
SWCA Owner’s Manual
Please be sure all of these parts are included before trying to use the SWCA.
Figure 1-1
SW Communications Adapter (SWCA)
Phone Cable
Custom-Made
Serial Port Adapter
SWCA
Adapter