Filter
Top Products
ENWW Troubleshooting PostScript (PS) errors 79
Troubleshooting PostScript (PS) errors
The following situations are PS language specific and may occur when several printer languages
are being used.
Note To receive a printed or screen displayed message when PS errors occur, open the Print Options
dialog box and click the desired selection next to the PS Errors section. You can also access this
from the embedded Web server.
Return to Finding the solution
.
PS Errors
Symptom Possible Cause Solution
The job prints in Courier (the
printer’s default typeface)
instead of the typeface you
requested.
The requested typeface is not
downloaded. A personality
switch may have been
performed to print a PCL job
just before the PS printing job
was received.
Download the desired font and send the
print job again. Verify the type and location
of the font. Download to printer if
applicable. Check with the software
documentation.
A legal page prints with
clipped margins.
Print job too complex. You may need to print your job at 600 dots
per inch, reduce the complexity of the
page, or install more memory.
A PS error page prints. Print job may not be PS. Make sure the print job is a PS job. Check
to see whether the software application
expected a setup or PS header file to be
sent to the printer.
Limit Check Error Print job is too complex. You may need to print your job at 600 dots
per inch, reduce the complexity of the
page, or install more memory.
VM Error Font Error Select unlimited downloadable fonts from
printer driver.
Range Check Font Error Select unlimited downloadable fonts from
printer driver.