Filter
Top Products
Powering on the Machine
Xerox Phaser 3320DN/3320DNI
User Guide
8
Powering on the Machine
The On/Off switch and the power cable socket are at the rear of the machine.
1. Connect the
AC Power Cord to the machine and a
power outlet. The power cord must be plugged into a
grounded power socket.
2. Press the
ON/OFF switch to the ON (I) position.
Power Save
This machine contains advanced energy conservation
technology that reduces power consumption when it is not in active use.
• When the printer does not receive data for an extended period of time, the Power Save mode
becomes active and power consumption is automatically lowered.
•Press the Power Save button to select the Power Save mode immediately.
To restore the machine to a normal state, press the Power Save button.
Powering off the Machine
There are two ways to switch the machine off:
•Press the ON/OFF switch to the (O) position.
•Press the Power Save button and use the arrow buttons on the control panel to select Power
Down and then press OK.
1
2
1
2