Filter
Top Products
PREINSTALLATION
“Postinstallation” chapter for information on how to order
stitcher wire after initial installation.
Tapes
Each of the tape drives available with your 4050/4090/4650 LPS
requires tapes of a different format.
26-track cartridge tapes The optional 26-track tape drive uses 0.5 inch compatible
cartridge tapes with a data capacity of 320 MB or 525 MB,
depending on the choice of DC6320 or DC6525 tape cartridges.
Both tapes are .25 inch ANSI compatible. Cartridges are not
available from Xerox.
18-track cartridge tapes The optional 18-track tape drive uses 0.5 inch IBM 3480
compatible cartridge tapes with a data capacity of 200 MB.
Cartridges are not available from Xerox.
9-track magnetic tapes The optional 9-track tape drive supports reel-to-reel 9-track 1600
bpi Phase Encoded (PE) and 6250 bpi Group Code Recording
(GCR) encoded magnetic tapes.
Space planning templates
Dimensions and space requirements for LPS components are
provided earlier in this chapter. The space planning templates
are designed to simplify the space planning process by helping
you create a floorplan for your LPS base components, particularly
if you will have shared clearance space.
The easiest way to use the space planning templates is to remove
the transparency located at the end of this chapter and move the
templates around on the grid (also located at the end of this
chapter) to find the optimum placement for your LPS
components. Make sure you consider other pieces of
equipment, such as storage cabinets and tables, when planning
space for your LPS.
The templates are to scale with the grid; each square is equal to
one foot. The curved dotted lines in the corners of the space
perimeters indicate the corners that may be rounded off while
still maintaining the required clearance space.
The templates provided are for the system controller and the
various printer configurations. Make sure you allow space for
optional equipment as appropriate. Your sales representative can
help you plan space for additional components.
There are a number of factors to keep in mind when planning
your site. These include:
• Clearance space requirements
• Cable lengths
• Efficiency of use.
Reference Refer to these sections in this chapter when considering the
various factors in planning the appropriate location for your LPS.
XEROX 4050/4090/4450/4650 LPS INSTALLATION PLANNING 1-31