Filter
Top Products
DocuColor 5000 Administrator Guide
1-3
1. Administrator overview
Finishing System Profiles overview
If your digital press has an optional, third-party, Digital Finishing
Architecture (DFA) device finishing, then the Finishing System
Profiles option is available to you.
TIP: This feature is available only if you are logged on as the
Administrator.
Once your system is configured for the optional finishing
accessory, the Finishing System Profiles option is accessed from
the System pull-down menu on the main UI screen.
TIP: This window is ready-only; you cannot change the
information shown on this screen. If you have more than one
finishing device connected to your digital press, you can select the
desired profile from the pull-down menu at the upper-left portion of
the Finishing System Profiles window.