DocuColor 5000 Administrator Guide
2-20
2. System Settings
To switch on a feature, perform the following:
1. From the System tab on the System Setting window, select
the NVM Read/Write button.
The NVM Read/Write window opens.
2. Enter the desired Chain Link Number:
• The Chain Link Number for Special Media Setting for
Drilled Papers is 700 545.
• The Chain Link Number for Special Media Setting for
LEF Tab Stock is 700 546.
• The Chain Link Number for Carbonless Media
Enablement is 700-920.
NOTE: For the purpose of this procedure, the following screens
show an example
of a Chain Link Number, Current Value, and
New Value; this example does not represent an actual Chain Link
Number. The Current Value and New Value numbers will vary
depending on the Chain Link Number entered.