Filter
Top Products
DocuColor 5000 Administrator Guide
3-23
3. Profiles
15. If required, choose a Paper Tray Air Assist option from the
pull-down menu.
TIP: The default setting Use Tray Option. It is recommended that
you leave this option at its default setting until you run test prints
and evaluate the output of the prints. Test Print is discussed in
more detail in Running test print
s.
NOTE: Refer to page 3-31 for information on the Paper Tray Air
Assist.
16. Load your custom paper in the desired paper tray.
17. Ensure that you select the correct paper information in the
Tray Properties window (size, weight, type). From the Type
pull-down menu, select the correct Custom Paper Profile.
18. Next: Running test prints.