Filter
Top Products
Wide Format Scan Service User Guide 1
1 Installing Wide Format Scan Service
Instructions for installing Wide Format Scan Service follow. Before
beginning the installation, log on to Print Services on Web as
Administrator, select the Properties tab, and perform the following:
1. Confirm that the settings for the IP Address and Subnet Mask
are correct.
2. Confirm that both FTP and SNMP are enabled.
NOTE The procedure below is written for Windows
®
XP Professional
systems. The installation procedures for Windows
®
2000 and
Windows
®
Server 2003 systems differ only in screen appearance.
1. Insert the CD ROM in the workstation’s CD ROM drive.
2. Select [Start] > [My Computer] and then select the CD ROM
drive in which you inserted the CD ROM.
3. When the contents of the CD ROM display, double click the zip
file named WideFormatScanServiceVer.x.x.x.x_XC.zip (Fig. 1).
Figure 1
4. Extract the contents of the zip file to the workstation’s Desktop.
A folder entitled [WideFormatScanServiceVerx.x.x.x_XC] will
be created on the Desktop (Fig. 2).
Figure 2
5. Double click the [WideFormatScanServiceVerx.x.x.x_XC] folder
that was created in step 4. A folder labeled [Disk1] will display
(Fig. 3).
Figure 3