Filter
Top Products
PCL 5
XEROX DOCUPRINT NPS GUIDE TO USING PAGE DESCRIPTION LANGUAGES 1-7
As with simplex, if the stapling attribute is set for the document on a
DocuPrint equipped with a High-Capacity Stitcher/Stacker, pages 2,
3, 4 and 5 are stapled together on all copies, but pages 6 and 7 are
not stapled together because the copy command is given explicitly
on each of pages 6 and 7.
PCL Duplex commands
The following table summarizes the behavior of a selection of PCL
Duplex commands (<ESC>&|#S and <ESC>&a#G) with respect to
blanking the back-sides of sheets.
Note: These commands force new sheets to be pulled regardless
of the value of the PlexChangesDynamic attribute.
Note: For releases prior to 7.x, the NPS plex attribute must be set
to Duplex in order to use the PCL Duplex commands. If the NPS plex
attribute is set to tumbleDuplex then the job is printed as tumble
duplex regardless of the PCL Duplex command.
Sheet 7 PAGE 4, no copy command PAGE 4, no copy command
PAGE 5, no copy command Sheet 7 PAGE 5, no copy command
Sheet 8 PAGE 6, <ESC>&l2X (2 copies) PAGE 6, <ESC>&l2X (2 copies)
Sheet 9 PAGE 6, <ESC>&l2X (2 copies) Sheet 7 PAGE 5, no copy command
Sheet 10 PAGE 7, <ESC>&l2X (2 copies) PAGE 6, <ESC>&l2X (2 copies)
Sheet 11 PAGE 7, <ESC>&l2X (2 copies) Sheet 8 PAGE 7, <ESC>&l2X (2 copies)
Sheet 12 PAGE 8, <ESC>&l1X (1 copy) PAGE 8, <ESC>&l1X (1 copy)
PAGE 9, no copy command Sheet 9 PAGE 9, no copy command
Table 1-4. Duplex PCL Copy command example (continued)
DocuPrint NPS collated output - duplex HP LaserJet 4si output - duplex
Table 1-5. PCL Duplex commands
DocuPrint NPS
(collated) HP LaserJet 4si
Next-side command (<ESC>&a0G) no new sheet no new sheet
Front-side command (<ESC>&a1G) forces new sheet forces new sheet
Back-side command (<ESC>&a2G) no new sheet no new sheet
Simplex command (<ESC>&l0S) forces new sheet forces new sheet
Duplex command (<ESC>&l1S) forces new sheet forces new sheet
*Feed from upper tray (<ESC>&l1H) forces new sheet forces new sheet
*Feed from manual feeder (<ESC>&l2H) forces new sheet forces new sheet
*Feed from lower tray (<ESC>&l4H) forces new sheet forces new sheet
Number of copies command (<ESC>&l#X) forces new sheet no new sheet