Filter
Top Products
VIPP
XEROX DOCUPRINT NPS GUIDE TO USING PAGE DESCRIPTION LANGUAGES 3-3
VIPP line mode extension (XGFNub)
The VIPP line mode extension (formerly called XGFNub) is a
DocuPrint NPS (Version 1.4 and higher) extension that enables
users to execute VIPP commands at the start of any VIPP document.
Multiple sets of commands may be enabled by the DocumentFormat
attribute. To invoke a command set named xxx, just set the
DocumentFormat attribute to “XGF/xxx.”
The following is an example of the extension used to execute the
VIPP command (job1.jdt) STARTLM (command set named “job1”) at
the front of the main data file:
1. Enter the following in the job 1 file/usr/xgfc/mislib/job1.ini:
%!
% custom.ini
(job1.jdt) STARTLM
2. Send the main data file to DocuPrint NPS to set the
DocumentFormat attribute to “XGF/job1.” Refer to your DocuPrint
NPS documentation for other methods to set the DocumentFormat
attribute, (such as by using a virtual printer or by the lpr -C switch).
Note: New sets of commands can be installed at any time by
creating new files called /usr/xgfc/mislib/xxx.ini, where xxx is the
name of the command set. The extension .ini is mandatory. Use all
lower-case characters in place of xxx.