Filter
Top Products
PCL 5
1-14 XEROX DOCUPRINT NPS GUIDE TO USING PAGE DESCRIPTION LANGUAGES
Driver recommendations for PCL 5c
This section identifies drivers that are recommended for the Windows
95 and the Windows NT 4.0 environments.
For Windows 95, the HP Color LaserJet 5/5M PCL 5C driver, version
vF2.2 is recommended. For the driver’s Color Setup option, select
Manual mode with the No Adjustment option to allow using device
RGB Color Space in the document. An alternative driver for this
environment is the Xerox DocuPrint C55 driver.
For Windows NT 4.0, the HP Color LaserJet 5/5M PCL 5C driver is
recommended. For the driver’s color Color Setup option, select
Manual mode with the No Adjustment option to allow using device
RGB Color Space in the document. For Graphic Mode, select HP-
GL/2 mode for all the graphics in the document.
Limitations for custom PCL 5c drivers
If you write your own PCL 5c drivers, the following are recommended
restrictions:
• Do not use Logical Operations that negate (NOT) either the
Texture or Destination.
• Do not use Logical Operations that involve using XOR for
Destination or Texture.
• Avoid using Logical Operation 136 in standalone mode. PCL
5C highlight color has been tailored to accommodate a special
way of using the Logical Operator sequence (136, 90)
generated by some applications. Therefore, using Logical
Operation 136 may cause the output to print incorrectly.