Xerox 92C Printer User Manual


 
Supplies
A-6 System Overview Guide
Dry ink
Dry ink (also called toner) is the powder which forms the image
on the printed page. There are six cartridges of black dry ink or
three cartridges of colored dry ink in each carton. You should
keep at least one extra cartridge on hand at all times. The
disposable cartridges are easily changed with no mess. The
consumption rate of Xerox dry ink is approximately one cartridge
per 30,000 pages for black dry ink and 86,500 pages for colored
dry ink. Use only dry ink that is specified for use in the DocuPrint
4850/4890 printer, as described in the consumable supplies
table.
NOTE: Dry ink (toner) yields are based on 5% area coverage for
black dry ink and 1.5% area coverage for colored dry ink. Your
yield may vary, depending on coverage.
Fuser lubricant
Fuser lubricant is a consumable item required by the printer. You
should keep at least two boxes on hand for installation by the
service representative. The consumption rate of Xerox fuser
lubricant is approximately one tube per 120,000 pages. For
product information, refer to the consumable supplies table in
this appendix.
Developer
Developer is not consumed by the printer but does have an
effective life of approximately 300,000 pages per bottle,
guaranteed by Xerox. Developer is a required item and must be
kept on hand.
Use only the developer specified for use in your 4850/4890/92C
printer.
For colored inks, use the color developer specified for each color
in the following table: