Filter
Top Products
Supplies
A-8 System Overview Guide
Tapes
The optional 4 mm cartridge tape drive uses 5 GB or 8 GB tapes.
The 1/4-inch QIC tape drive uses quarter-inch stream cartridge
tapes. The tape data capacity should be 320/525 MB. Tape
density is critical. The QIC drive can read low density tapes, but
to write reliably requires tape with 21,000 Flux Transitions Per
Inch (FTPI). The FTPI figure is usually listed on the cartridge.
Fonts
Data can be printed on DocuPrint printers in many sizes and
type styles called fonts. A font is a character set which has
unique characteristics, such as type style, size, weight,
orientation (portrait, landscape, inverse portrait, and inverse
landscape), character spacing (fixed and proportional), line
spacing, and postures (Roman, italic, and so forth).
There are three classifications of fonts:
• Standard fonts
• Licensed fonts
• Custom fonts.
Standard fonts A library of 51 fonts is provided with your printer’s operating
system software.
Licensed fonts Additional fonts may be ordered from your local Xerox Font
Center.
Custom fonts Custom fonts and graphic images such as company logos and
signatures can be digitized by the Xerox Font Center for use on
your printer.
Receiving fonts Fonts are received on a diskette from your local Xerox Font
Center.